ALL NEW F30 minilab film processor for C41 and BW (Noritsu V30) leader card roller transport

BRAND NEW MANUFACTURING - not a "refurbished", rusted out, decades old Noritsu machine that has seen its best days 20 years ago, but a BRAND NEW machine with all new materials, all new electronics, a full supply of parts and support!

SPECIAL ORDER ITEM - 2-3 month lead time, delivery to your door in the USA!
No import/customs fees or tariffs/duties

This product requires payment by bank transfer, though we can arrange a payment by paypal or card for a small fee, or a partial card/bank payment is also possible. Please inquire to complete order before placing the order on the website.

Machine is delivered with all bits needed to operate right out of the box, however, a wiring harness is NOT included. We can supply this from our US location on order.

***This machine uses 240V power and requires a 30 amp 240V breaker and socket installed by a qualified electrician in order to be used. Once this breaker and socket is installed, the machine connects and runs directly off your wall socket. Any qualified electrician can install this simple socket (similar to an electric oven or washing machine/dryer socket).

Suitable for both C41 AND BW work, see details below.

Introducing the F30 processor:
Based on the original design of the Noritsu V30s (Shanghai version), this machine follows the same time proven design and technology, but using all modern and current components and manufacturing. Made in China by past Noritsu engineers and technicians, using the same assembly know how and specs.

Ideal for any lab, with low or high volume, thanks to the hyper efficient C41RA chemistry specs, ultra low replenishment rates mean chemicals last longer and the machine can be run efficiently with ultra low volume or super high volume alike.

This machine is designed for C41RA chemistry, widely available from Bellini and other manufacturers world wide. Ask us about setting up a bulk order for your C41RA chemistry at the time of ordering the machine.

This machine uses standard two track roller transport leader cards and can take any combination of up to two 35mm, 120, APS or 110 film at a time, with a maximum capacity of 30 rolls per hour

Processing time from dry to dry of about 10-12 minutes.

This machine does not require any plumbing! It operated completely independently, but does require draining waste and adding water from time to time.

The 10L chemistry storage tanks allow continuous work for hundreds of rolls before replenishment is needed.

Fully automatic, using the same user interface of the familiar Noritsu processor system and display. User controlled temp, replenish rates, diagnostics and water re-fill options.

Ultra consistent processing with simple controls to ensure seamless lab operations, whether you are scanning, printing or just developing, this machine offers a super quick turnaround ability.

BW processing:
This machine can be configured to run as a BW processor with special conditions:
Process temp 30C
D76 developer @30C processing at 3-3:30 minutes
Rapid fixer
4X wash cycles
We can supply a D76 and fixer kit for this machine for this operation.
This set up is generally universally suitable for most BW applications, but some film types might not be compatible or provide non ideal results. Contact us for more info

Included with the machine:
All shipping, import and customs fees, delivery to your door
F30 Processor
Dry film rack
Film leader card splicing and loading table assembly (handles both 35mm and 120)
Tape dispenser and splicing tape sample (more available, sold separately)
5 leader cards (move available, sold separately)
Twincheck dispenser with 2000 sticker roll
Spare filters and air cleaners
Spare gears, driver cogs and springs
Manual film picker (F135 automatic film pickers available, sold separately)
Changing bag
1X 120 cartridge (more available, sold separately)

NOT INCLUDED:
Wiring harness to connect to US power (can be supplied by CatLABS - 100$ for a 15ft whip)
240V 30A breaker and socket - must be installed by qualified electrician by customer, before machine can be used