Bellini Processing Chemistry Kit C-41, E-6, ECN-2, B&W Reversal, and RA-4
Bellini Kit C-41 1 Liter Negative Film Processing Kit contains products to make 1 liter of Developer – 1 liter of Bleach-RA – 1 liter of Fixer RA and 10 liters of Stabilizer.
Most users who have tried various C-41 kits say that Bellini's kit is the best. Their kit uses the classic, four chemical process (Dev, Bleach, Fixer, Stabilizer) and easy to follow instructions. They also offer the developer alone (Item #2510006) so you can extend the life of the kit even further.
The whole process takes less than 15 minutes and yields proper color and contrast without need for any water washing steps before or between chemical steps.
Features:
• It is made for the C41 negative film process at 38°C (C41-RA Rapid Access process).
• The capacity of this kit is 16 negative films (35 mm) of 24 exp.
Bellini Kit E-6 1 Liter Slide Film Processing Kit to make 1 liter of the following solutions: First Developer, Reversal bath, Color Developer, Pre-bleach, Bleach, Fixer and 10 liters of Stabilizer.
A proper E-6 formula with every bath separate may seem daunting, but following their instructions is easy, you know your color and contrast will be correct, your film will be made as archival as possible, and the concentrated chemicals last longer than the ones used in competitors' three bath kits.
Features:
• Color Reversal Process the classic way
• Maximize archival qualities
• Longer shelf life than three bath kits
• Yields on average 12 rolls of 36 exp.
Bellini Kit ECN-2 1 Liter Motion Picture Process is designed for processing cinematic films like Kodak Vision3 (50D, 200T, 250D, and 500T) and has the capacity to process 12 35mm x 36exp rolls, 1 16mm x 30.5m, or 6 Super 8 x 15m.
This chemical kit was designed for home use, but is based on the chemicals used for the Italian movie industry. Cinematographer-quality results have never been easier to get at home.
This Kit contains 1 liter of ready-to-use Pre-bath and concentrated solutions to prepare: 1 liter of Developer, Stop Bath, Bleach and Fixer. In addition, it contains concentrated chemicals to prepare 10 liters of Final Rinse.
Bellini B&W Reversal Film Processing Kit 1 Liter is to process 10 -12 negative films of 36 exp. and, using chemical reversal agent, reverses most B&W films with a clear base but recommended for use with these films and settings:
• PAN F exposed at 25 ASA
• FP4+ Plus exposed at 125 ASA
• SCALA exposed at 200 ASA
• Rollei Ortho 25 exposed at 25 ASA
• Orwo UN-54 and UN-74
Reversal without re-exposure to light! This kit includes a reversal bath that omits the need to re-expose the film to light in order for reversal of the image. If you prefer the re-exposure method, simply skip the reversal chemical step.
It is recommended that you prepare only the amount of solution needed, using small doses to prevent formation of fog in the low lights.
Features:
• No need to re-expose to light!
• Processes up to 12 35mm 36 exp rolls
Bellini RA-4 Paper Processing Kit 5 Liters contains products to make 5 liters of Developer, 5 liters of Bleach Fix and 20 liters of Stabilizer.
This kit is designed for low volume users of color reversal paper and is most efficiently used in small rotary processors where this kit can yield about 60 8x10 prints. The included stabilizer increases the life of each print. A pro-quality kit with home processing ease.
Features:
• It is made for the RA4 process at 35°C.
• Includes a stabilizer for print longevity.
• The capacity of this kit is 10 square meters (approx. 107 square feet) of RA4 photographic paper.
